Oranier Polar W 2.0 Fireplace 6.5 kW Soapstone

Oranier Polar W+ 2.0 Wood Stove with 40 kg Storage Mass

The modern Oranier Polar W+ 2.0 wood stove is characterized by its oval shape and offers a variety of cladding options. The oval shape gives it a soft appearance and makes it suitable for different living areas. In our variants menu, you can easily select your favorite. Thanks to the integrated glass cleaning system, the beautiful panoramic glass provides a long-lasting, unobstructed view of the fire. The practical compartment under the combustion chamber discreetly accommodates additional firewood.

The Oranier Polar W+ 2.0 shines with a nominal output of 6.5 kW and an efficiency of over 80%. This allows it to heat up to 131 m³ of room volume. Particularly efficient and environmentally friendly is the Oranier Polar also thanks to the storage mass. This is charged with thermal energy during combustion and releases the stored heat slowly into the room after the burn. The installed multiple locking system prevents the combustion chamber door from warping due to high temperatures. The beautiful wood stove thus controls the combustion more efficiently, and the triple-air system doses the combustion air optimally.

Features & Advantages

• Storage stove with 40 kg of storage mass
  40 kg of storage mass is integrated in the upper part, turning the beautiful wood stove into a storage stove. During combustion, the storage stone absorbs thermal energy. It continues to release this energy into the room for a long time after the burn. This makes the stove especially efficient and environmentally friendly.
• Multiple locking system
  The multi-point locking system prevents the combustion chamber door from warping due to high temperatures. Additionally, it prevents the entry of unwanted air and stabilizes the combustion quality of the stove.
• Triple air system
  Thanks to the triple air system from Oranier, the combustion air is optimally dosed and always supplied where it is needed for the combustion process. This targeted use of primary, secondary, and tertiary air results in particularly efficient and environmentally friendly combustion.
• Air-cooled handle
  The handle of the combustion chamber door is continuously cooled by air flows. This reduces the risk of burns.
• Enclosed wood compartment
  Below the combustion chamber there is a closed wood compartment. Here you can discreetly store your firewood supply and always have it within reach.
• Various cladding options
  With the Oranier Polar W+ 2.0, you can choose your favorite from numerous models. You can complement the black steel body with different claddings - ranging from sandstone and soapstone to differently colored ceramics, Oranier offers a wide selection.
• Integrated glass cleaning system
  The sophisticated glass cleaning system prevents condensation and the deposition of dust particles and soot on the inside of the glass through a precisely directed airflow. This keeps the view of the flames unobstructed.

Application & Areas of Use

The Oranier Polar W+ 2.0 wood stove, with its rated heat output of 6.5 kW, is ideal for rooms up to 131 m³ in volume. This corresponds to about 55 m² of living space with a standard ceiling height. With a weight of 197 kg, it stands stable and secure, but should be set up by two people. Installation requires a solid base and adherence to safety distances from combustible materials.

Optionally, the wood stove can be retrofitted for external air supply. Instead of using valuable room air, air from the outside can optionally be used for combustion. For this, the wood stove needs to be retrofitted with a connection nozzle for external combustion air, making room air-independent operation possible. This is particularly necessary in small or well-sealed rooms.

The flue pipe connection with a diameter of 150 mm can be installed either at the rear or at the top, offering flexible installation options. Wood, wood briquettes, and lignite are approved as fuels, with a maximum log length of 30 cm. The stove is suitable for 24-hour continuous operation and meets all current emission regulations.

Approvals & Standards

• DIN EN 13240 - European standard for room air-dependent appliances for solid fuels
• Ecodesign emission limits Stage II - Meets the requirements of the 2nd stage of the Federal Immission Control Ordinance
• 15a B-VG for Austria - Approval for the Austrian market according to Article 15a B-VG

FAQ: Frequently Asked Questions about the Oranier Polar W+ 2.0 Wood Stove

For what room size is the Oranier Polar W+ 2.0 wood stove suitable?

With its nominal heat output of 6.5 kW, the stove is suitable for rooms up to 131 m³ in volume, which corresponds to approximately 55 m² of living space with a standard ceiling height. This output is completely sufficient for medium-sized living areas in well-insulated houses. For poorly insulated rooms or very high ceilings, you should plan for a slightly smaller room size.

How long does the stove retain heat after the fire has gone out?

Thanks to the integrated 40 kg of storage mass, the stove continues to release heat over a long period, even after the fire has died down. The storage stones absorb heat energy during combustion and release it slowly again. This significantly extends the heat output, and the stove is suitable for 24-hour continuous operation. The exact reheating time depends on the duration of burning and the room temperature.

Which fuels can be used in the Oranier Polar W+ 2.0?

Approved fuels are wood, wood briquettes, and lignite briquettes. The maximum log length is 30 cm, so commercially available firewood can be used without any problems. Well-dried hardwood with a residual moisture content below 20% is recommended. Softwood can also be burned, but it results in more resin deposits in the chimney.

Is operation independent of room air possible?

Yes, the stove can be operated both dependent on and independent of room air. For room air-independent operation, it must be retrofitted with an external combustion air connection. This is especially useful in well-sealed houses, low-energy houses, or small rooms, as no valuable room air is used for combustion. The connection is made via a 100 mm diameter.

Which wood is best suited for the Oranier Polar W+ 2.0?

Best suited is oven-dried hardwood such as beech, oak, or ash with a maximum of 20% residual moisture. These types of wood burn evenly and develop a high heating output. The log length should be a maximum of 30 cm. Fresh or damp wood significantly reduces efficiency and leads to increased soot formation. More on this in our magazine: Storing firewood correctly: Tips for optimal drying and storage

How do I properly start up the Oranier Polar W+ 2.0?

Start with dry kindling and fire starters in the lower combustion chamber area. Fully open the air supply and gradually add larger logs after the fire has started. The triple-air system automatically regulates the combustion air optimally. Avoid overloading the combustion chamber and only reduce the air supply once the wood is fully ignited. More on this in our magazine: How to properly light a wood stove - step by step

Oranier - Technology for families since 1904 Oranier is a German manufacturer based in Haiger (Hesse), whose origins date back to the early 17th century. The range includes fireplace, pellet, and water-bearing stoves with casings made of steel, natural stone, or ceramic. The in-house Dual Fire Technology ensures particularly efficient fuel utilization through the afterburning of residual gases. The company group also includes the brand Justus.

Technical data

Nominal heat output

6.5 kW

Efficiency

80 %

Maximum room heating volume

131 m³

CO emission

937 mg/cm³

Fine dust emission

38 mg/m³

Flue gas mass flow

6.3 g/s

Flue gas temperature at the socket

245 °C

Dimensions (H x W x D)

1197 x 531 x 443 mm

Weight

197 kg

Ø Flue pipe connection

150 mm

Direction of flue pipe connection

rear, top

Height from bottom edge to center of flue pipe socket

987 mm

Body color

Gray, Black, Silver

Cladding material

Soapstone, Steel, Painted

Combustion chamber material

Vermiculite

Approved fuels

Lignite, Wood, Wood briquettes

Max. length of fuel

30 cm

Required draft at nominal heat output

10 Pa

Multiple occupancy / Design type

Yes / Design Type 1

Integrated glass cleaning system

Suitable for 24 h continuous operation

yes

Complied standards, approvals, and regulations

Ecodesign Stage 2, DIN EN 13240, Approval for Austria according to 15a B-VG

Downloads

Technical Data

Nominal Heat Output	6.5 kW
Efficiency	80 %
Maximum Room Heating Capacity	131 m³
CO Emission	937 mg/cm³
Fine Dust Emission	38 mg/m³
Exhaust Mass Flow	6.3 g/s
Exhaust Gas Temperature at Connector	245 °C
Dimensions (H x W x D)	1197 x 531 x 443 mm
Weight	197 kg
Ø Flue Pipe Connection	150 mm
Direction of Flue Pipe Connection	rear, top
Height from lower edge to middle of flue pipe connection	987 mm
Body color	Gray, Black, Silver
Cladding material	Soapstone, Steel, Painted
Combustion chamber material	Vermiculite
Approved fuels	Lignite, Wood, Wood briquettes
Maximum fuel length	30 cm
Required draft at nominal heat output	10 Pa
Multiple occupancy / Type	Yes / Type 1
Suitable for 24-hour continuous operation	yes
Standards, approvals, and regulations met	Ecodesign emission limits Level 2, DIN EN 13240, Approval for Austria according to 15a B-VG
Brand	Oranier
Article number	oranier-polar-w
EAN	4260405761647